| Page 2 |
| PULLEY(15/32" and 1/2") for industrial and ag. applications. 2-1/2" diameter, small enough for adequate RPM on slower speed motors, large enough for long belt life. Cold rolled steel, .670" bore for DELCO and FORD alternators. Part No. A202 $13.95 |
| EXTRA WIDE BELT PULLEY (5/8", 21/32", 11/16" and 3/4") for industrial and ag. applications. 2-1/2" diameter. Cold rolled steel, .670" bore with special long neck nut. Part No. A203 $18.95 |
| CURVED BELT TENSION EXTENSION BRACKET. Use with alternator conversions. 1/4" thick x 1-1/4" wide curved end bar. Can be bolted or welded to existing bracket. Unplated for welding. Part No. A215 $21.95 |
| UNIVERSAL RELAY for a multitude of 12 volt applications. One normally closed contact and one normally open. POS. or NEG. ground. With connector and terminals. Similar to DELCO field relay. Part No. A100 $19.95 |
| UNIVERSAL BELT TENSION EXTENSION BRACKET. Use with alternator conversions. Design allows angles up to 45 degrees. Part No. A210 $9.95 |
| UNIVERSAL IGNITION RESISTOR. Ideal for converting 6 volt vehicles to 12 volt systems. Agricultural, industrial and commercial applications. Comes with Instructions Use with universal alternator brackets. Part No. A250 $8.95 |
| HEAVY DUTY CURVED BELT TENSION EXTENSION BRACKET. For "truck type" J-180 alternator installations. Heavier 3/8" thick x 1-1/4" wide curved end bar. Can be bolted or welded to existing bracket. Unplated for welding. Part No. A220 $28.95 |
| Brackets & Accessories |
